During the operation, it is necessary to pay attention to the Raymond Mill Grinding Plant For Talc uniform feeding, the ore is not allowed to fill the crushing cavity; and the larger size of the feeding block should not be greater than 0.85 times the width of the feeding port. At the same time, when feeding the ore, strictly prevent non-crushed materials from entering the crusher. During the operation, it is often necessary to pay attention to the block of ore stuck to the feed port of the crusher. If it has been stuck, use an iron hook to turn the ore; if the block of ore needs to be taken out of the crushing cavity, special equipment should be used It is strictly forbidden to do these tasks by hand to avoid accidents.

During the operation of the Efficient Quarry Crusher Manufacturers machine. If there is too much ore or the crushing cavity is clogged, the ore feeding should be suspended. After the ore in the crushing cavity is crushed, the mine feeder should be started. But at this time, the miner is not allowed to stop running. In operation, it should not usually exceed 60 ℃, in order to prevent the melting of the alloy bearing bush and produce a bush burning accident; when the bearing temperature is found to be high, do not stop the operation immediately, and take effective measures to reduce the bearing temperature in time Large oil supply, forced ventilation, or water cooling, etc.) After the bearing temperature drops, stop the vehicle to check and eliminate the fault.

In order to ensure the normal operation of the machine, people who are not familiar with the operation rules are not allowed to operate the crusher alone. When the crusher is stopped, it must be stopped in the order of the production process. First of all, the ore feeding must be stopped. After all the ore in the crushing cavity is discharged, the crusher and belt conveyor should be stopped. When the crusher stops, the motor of the oil pump can be stopped. If the crusher suddenly stops for some reason, before the accident is processed and ready to start, the backlog of ore in the crushing chamber must be cleared before it is allowed to start operation: professional production of energy-saving crushers, sand making machines, and more professional crusher production Quotient.